Looking for stainless steel compression tube fittings in Canada? Samvay supplies double ferrule instrumentation tube fittings in SS 316, duplex, super duplex and nickel alloys, certified to EN 10204 3.1.
Samvay Fluid Tekniks manufactures instrumentation tube fittings at its Ahmedabad works and supplies them to Canada, where oil sands and LNG on the west coast drive most instrumentation demand. Canadian projects often need low temperature impact tested material, which we supply with the test reports.
Instrumentation tube fittings use a front and back ferrule to grip and seal tubing without welding, giving a leak tight, vibration resistant joint that can be remade many times during maintenance. In Canada the typical service is extreme cold and abrasive oil sands service, so grade selection and documentation matter as much as price. Every order ships with heat traceable material and a test record.
Instrumentation Tube Fittings for industries in Canada
Control and sampling tubing on skids and instrument panels.
Control and sampling tubing on skids and instrument panels.
Hydraulic and pneumatic control tubing on heavy equipment.
Clean utility and nitrogen blanketing lines.
Choosing the right grade in Canada
Service conditions in Canada usually mean extreme cold and abrasive oil sands service. These are the grades we most often supply for that duty.
| Recommended grade | Why it suits Canada |
|---|---|
| SS 316L with impact testing | Low temperature and cryogenic duty, with Charpy test results on request |
| SS 316 or carbon steel A105, heavy pattern | Vibration, dust and frequent remaking, where thicker bodies and hard seats last longer |
Instrumentation Tube Fittings specifications
| Types | Tube to Female, Instrument Pipe Fittings, Tube to Union, Accessories, Tube to Male |
|---|---|
| Equivalent To | DK-LOK, PARKER, SWAGELOK, HOKE |
| Standard | ASME SA-479, Type 304-SS, BS 970 304S11, DIN 4401, ASTM A276 Type 304 |
| Sizes | 1/8’’ to 2’’ and 3mm to 50mm |
| Ends | Threaded, Welding, JIC |
| Pressure Rating | 1000 Psi, 3000 Psi, 6000 Psi, 10000 Psi |
| Threads | NPT , BSPT, BSPP |
| Specification | Items Made from Hex, ASTM A276; Items made from Round Bar- ASTM A182 |
| HS CODE | 73072900 |
Instrumentation Tube Fittings we supply in Canada
Standards and documents for projects in Canada
- CSA B51 registration where required
- ASME B31.3
- NACE MR0175
- Positive material identification and hydrostatic test reports on request
- Packing lists, origin certificates and HS code 73072900 or 84818030 on every invoice
Delivery to Canada
We deliver by sea from Mundra or Nhava Sheva to Vancouver or Montreal in about 30 to 40 days. Our regular delivery points include:
- Alberta
- British Columbia
- Ontario
Frequently asked questions
Which material grade do you recommend for projects in Canada?
For low temperature and cryogenic duty, with Charpy test results on request, we usually recommend SS 316L with impact testing. Where conditions are milder, SS 316 or carbon steel A105, heavy pattern is a cost effective alternative. Share your process data and we will confirm the grade before quoting.
Do you deliver instrumentation tube fittings to Alberta and British Columbia?
Yes. We ship by sea from Mundra or Nhava Sheva to Vancouver or Montreal in about 30 to 40 days. Regular consignments reach Alberta, British Columbia and Ontario, and mixed orders of valves, fittings and accessories can be consolidated into one shipment with a single set of documents.
What certificates come with orders for Canada?
Orders for Canada are supplied to CSA B51 registration where required, ASME B31.3 and NACE MR0175. Every part is heat marked and traceable to its mill certificate, and third party inspection by the agency of your choice can be arranged before dispatch.
Are your tube fittings interchangeable with other double ferrule brands?
Our double ferrule design follows the established geometry used by the leading instrument fitting brands, and the fittings are available from 1/8 inch to 2 inch and 3 mm to 50 mm, rated up to 10000 psi depending on tube wall, with male, female, union, reducer and bulkhead configurations. For mixed brand installations on sites in Canada we still recommend using ferrules and nuts from one supplier on each joint.
How do I request a quote for Canada?
Email your item list with sizes, grade, quantity and delivery point to sales@samvayglobal.com or message us on WhatsApp at +91 77389 26862. We reply within one working day with price, lead time and shipping terms for Canada.