Looking for instrumentation valve suppliers in Edmonton and across Alberta? Alberta's oil sands and the Industrial Heartland near Edmonton are among our most active Canadian markets.
From our machining works in Ahmedabad, India, we supply Alberta with needle, manifold and ball valves, tube fittings and high pressure pipe fittings, each part heat marked and traceable to its mill certificate.
What buyers in Alberta order from us
Needle Valves for double block isolation of instruments on hydrocarbon lines during calibration.
Instrumentation Tube Fittings for control and sampling tubing on skids and instrument panels.
High Pressure Pipe Fittings for small bore process connections on separators, compressors and metering skids.
High Pressure Pipe Fittings for utility steam, compressed air and hydraulic connections.
Recommended grades for Alberta
Typical service in Alberta means extreme cold and abrasive oil sands service. These are the grades we most often supply here:
| Grade | Why it suits Alberta |
|---|---|
| SS 316L with impact testing | Low temperature and cryogenic duty, with Charpy test results on request |
| SS 316 or carbon steel A105, heavy pattern | Vibration, dust and frequent remaking, where thicker bodies and hard seats last longer |
| Hastelloy C276 or Monel 400 | Aggressive acids, chlorinated media and effluent where stainless steel would pit |
Products for buyers in Alberta
Needle Valves
Needle valves for oil sands production around Fort McMurray in Alberta.
View products
High Pressure Pipe Fittings
High pressure pipe fittings for petrochemicals in Alberta.
View products
Instrumentation Tube Fittings
Instrumentation tube fittings for natural gas processing in Alberta.
View products
Manifold Valves
Manifold valves for pipelines and midstream in Alberta.
View products
Instrumentation Ball Valves
Instrumentation ball valves for oil sands production around Fort McMurray in Alberta.
View productsStandards and documents for Alberta
- CRN registration (CSA B51) where required
- ASME B31.3
- NACE MR0175
- Low temperature impact testing
- EN 10204 3.1 material certificates, PMI and hydro test reports
Delivery to Alberta
We deliver by sea from Mundra or Nhava Sheva to Vancouver, then by rail or road to Alberta, in about 35 to 45 days. Regular delivery points in Alberta include:
- Edmonton
- Fort Saskatchewan
- Fort McMurray
- Calgary
Industrial areas we supply in Alberta
We supply instrumentation fittings, instrumentation valves, stainless steel tube fittings and high pressure fittings to buyers in Fort Saskatchewan, Edmonton and Calgary.
- Fort Saskatchewan
- Edmonton
- Calgary
Frequently asked questions
Does Samvay supply instrumentation valves and fittings to Alberta?
Yes. Alberta's oil sands and the Industrial Heartland near Edmonton are among our most active Canadian markets. We supply needle valves, manifold valves, ball valves, tube fittings and high pressure pipe fittings in stainless steel, duplex, super duplex and nickel alloys.
How long does delivery to Alberta take?
We ship by sea from Mundra or Nhava Sheva to Vancouver, then by rail or road to Alberta, in about 35 to 45 days. Mixed orders can be consolidated into one shipment with a single set of export documents.
Which standards do you follow for projects in Alberta?
Orders are supplied to CRN registration (CSA B51) where required, ASME B31.3, NACE MR0175, low temperature impact testing, with EN 10204 3.1 material certificates, PMI and hydro test reports on request.
Which material grade do you recommend for Alberta?
For low temperature and cryogenic duty, with Charpy test results on request, we usually recommend SS 316L with impact testing. Where conditions are milder, SS 316 or carbon steel A105, heavy pattern is a cost effective choice. Share your process data and we will confirm the grade before quoting.
Request a quote for Alberta
Tell us the product, material, size, pressure, quantity and delivery point in Alberta.