Looking for an instrumentation valve supplier in Ontario, from Sarnia to Hamilton? Sarnia's Chemical Valley and Ontario's power and manufacturing plants regularly send us requirements for instrumentation valves and fittings.
From our machining works in Ahmedabad, India, we supply Ontario with needle, manifold and ball valves, tube fittings and high pressure pipe fittings, each part heat marked and traceable to its mill certificate.
What buyers in Ontario order from us
Instrumentation Ball Valves for fast shut off on sampling, drain and vent lines.
Instrumentation Tube Fittings for condensate pot and sensing line connections.
High Pressure Pipe Fittings for high pressure lubrication and descaling lines.
Instrumentation Tube Fittings for analyser and utility tubing in corrosive plant areas.
Recommended grades for Ontario
Typical service in Ontario means cold winters and process plant service. These are the grades we most often supply here:
| Grade | Why it suits Ontario |
|---|---|
| SS 316L with impact testing | Low temperature and cryogenic duty, with Charpy test results on request |
| Duplex 2205 or Inconel 625 to NACE MR0175 | Sour hydrocarbon service, where hardness control and sulphide stress cracking resistance are required |
| SS 316H or alloy steel F11 and F22 | High temperature steam service, supplied with IBR documentation where required |
Products for buyers in Ontario
Needle Valves
Needle valves for refining and petrochemicals in Ontario.
View products
High Pressure Pipe Fittings
High pressure pipe fittings for power generation in Ontario.
View products
Instrumentation Tube Fittings
Instrumentation tube fittings for steel and manufacturing in Ontario.
View products
Manifold Valves
Manifold valves for pharmaceuticals and labs around Toronto in Ontario.
View products
Instrumentation Ball Valves
Instrumentation ball valves for refining and petrochemicals in Ontario.
View productsStandards and documents for Ontario
- CRN registration (CSA B51) where required
- ASME B31.3
- EN 10204 3.1 material certificates, PMI and hydro test reports
Delivery to Ontario
We deliver by sea from Mundra or Nhava Sheva to Montreal or Halifax, then by road to Ontario, in about 35 to 45 days. Regular delivery points in Ontario include:
- Sarnia
- Hamilton
- Toronto
- Nanticoke
Industrial areas we supply in Ontario
We supply instrumentation fittings, instrumentation valves, stainless steel tube fittings and high pressure fittings to buyers in Sarnia, Hamilton, Nanticoke and Toronto.
- Sarnia
- Hamilton
- Nanticoke
- Toronto
Frequently asked questions
Does Samvay supply instrumentation valves and fittings to Ontario?
Yes. Sarnia's Chemical Valley and Ontario's power and manufacturing plants regularly send us requirements for instrumentation valves and fittings. We supply needle valves, manifold valves, ball valves, tube fittings and high pressure pipe fittings in stainless steel, duplex, super duplex and nickel alloys.
How long does delivery to Ontario take?
We ship by sea from Mundra or Nhava Sheva to Montreal or Halifax, then by road to Ontario, in about 35 to 45 days. Mixed orders can be consolidated into one shipment with a single set of export documents.
Which standards do you follow for projects in Ontario?
Orders are supplied to CRN registration (CSA B51) where required, ASME B31.3, with EN 10204 3.1 material certificates, PMI and hydro test reports on request.
Which material grade do you recommend for Ontario?
For low temperature and cryogenic duty, with Charpy test results on request, we usually recommend SS 316L with impact testing. Where conditions are milder, Duplex 2205 or Inconel 625 to NACE MR0175 is a cost effective choice. Share your process data and we will confirm the grade before quoting.
Request a quote for Ontario
Tell us the product, material, size, pressure, quantity and delivery point in Ontario.