Looking for stainless steel instrumentation ball valves in Saudi Arabia? Samvay supplies high pressure ball valves rated up to 6,000 psi, with PTFE, PEEK and graphite seats.
Buyers in Saudi Arabia use Samvay instrumentation ball valves across crude oil production, refining and petrochemicals and desalination, all machined and tested at our Ahmedabad works. Saudi industrial cities like Jubail and Yanbu run some of the largest hydrocarbon plants in the world, with demanding documentation.
An instrumentation ball valve gives fast quarter turn shut off on small bore instrument, sampling and utility lines, with a low pressure drop and a clear open or closed position. In Saudi Arabia the typical service is desert heat, sand ingress and sour (H2S) process service, so grade selection and documentation matter as much as price. Every order ships with heat traceable material and a test record.
Instrumentation Ball Valves for industries in Saudi Arabia
Quarter turn isolation on chemical injection and instrument air.
Fast shut off on sampling, drain and vent lines.
Isolation on sample and dosing lines.
Isolation on hydraulic and lubrication circuits.
Choosing the right grade in Saudi Arabia
Service conditions in Saudi Arabia usually mean desert heat, sand ingress and sour (H2S) process service. These are the grades we most often supply for that duty.
| Recommended grade | Why it suits Saudi Arabia |
|---|---|
| Duplex 2205 or Inconel 625 to NACE MR0175 | Sour hydrocarbon service, where hardness control and sulphide stress cracking resistance are required |
| Super duplex 2507 or S32760 | High chloride air and seawater, where PREN above 40 resists pitting and crevice corrosion |
| Hastelloy C276 or Monel 400 | Aggressive acids, chlorinated media and effluent where stainless steel would pit |
Instrumentation Ball Valves specifications
| Instrumentation Ball Valve | Specifications |
|---|---|
| Thread | BSPP, NPT, UNF, JIC, BSPT, METRIC |
| Valve Size | 6 MM TO 50 MM or 1/8″ TO 2″ |
| Function | 4 Way, 3 Way, 2 Way, 5 Way, |
| Connection | Butt Weld, Tube End, Threaded, Socket Weld |
| Seal Ring Material | PVDF, PTFE, PEEK, DELRIN, GRAPHITE |
| Pressure Rating | 3000 PSI, 1500 PSI, 6000 PSI |
| Media | Air, Hydraulic Oil, Gas, Water, Hot Water, Steam, Sea Water, Cold Water, Chemical |
| Standard | DIN, ISO, API , ANSI, AWWA, ASME, MSS |
| Packing Details | Wooden Pallet, Box Packing |
| Body Type | Bar Stock |
| Material | SS 316, SS 304, SS 316 TI, ALLOY 20, SMO 254, 904L & ALL OTHER ALLOYS |
| Equivalent Brands | Oliver Valve, Parker, Swagelok, Hamlet, Dk-Lok, Hoke |
Instrumentation Ball Valves we supply in Saudi Arabia
Standards and documents for projects in Saudi Arabia
- Saudi Aramco SAES and SAMSS material requirements
- NACE MR0175
- ASME B31.3
- Positive material identification and hydrostatic test reports on request
- Packing lists, origin certificates and HS code 73072900 or 84818030 on every invoice
Delivery to Saudi Arabia
We deliver by sea from Mundra or Nhava Sheva to Dammam or Jeddah in about 7 to 10 days, or by air. Our regular delivery points include:
- Jubail
- Yanbu
- Ras Tanura
- Dammam
Frequently asked questions
Which material grade do you recommend for projects in Saudi Arabia?
For sour hydrocarbon service, where hardness control and sulphide stress cracking resistance are required, we usually recommend Duplex 2205 or Inconel 625 to NACE MR0175. Where conditions are milder, Super duplex 2507 or S32760 is a cost effective alternative. Share your process data and we will confirm the grade before quoting.
How do instrumentation ball valves reach Saudi Arabia from India?
Yes. We ship by sea from Mundra or Nhava Sheva to Dammam or Jeddah in about 7 to 10 days, or by air. Regular consignments reach Jubail, Yanbu, Ras Tanura and Dammam, and mixed orders of valves, fittings and accessories can be consolidated into one shipment with a single set of documents.
What certificates come with orders for Saudi Arabia?
Orders for Saudi Arabia are supplied to Saudi Aramco SAES and SAMSS material requirements, NACE MR0175 and ASME B31.3. Every part is heat marked and traceable to its mill certificate, and third party inspection by the agency of your choice can be arranged before dispatch.
Which seat materials and end connections are available?
Our instrumentation ball valves are available from 1/8 inch to 2 inch (6 mm to 50 mm), rated at 1500, 3000 and 6000 psi, with NPT, BSPP, BSPT, JIC and metric threads, tube ends, socket weld or butt weld ends, and PTFE, PEEK, PVDF or graphite seats. Seat material is chosen for the media and temperature on each project in Saudi Arabia, from water and air to steam, hydraulic oil and seawater.
How do I request a quote for Saudi Arabia?
Email your item list with sizes, grade, quantity and delivery point to sales@samvayglobal.com or message us on WhatsApp at +91 77389 26862. We reply within one working day with price, lead time and shipping terms for Saudi Arabia.