Looking for stainless steel compression tube fittings in Saudi Arabia? Samvay supplies double ferrule instrumentation tube fittings in SS 316, duplex, super duplex and nickel alloys, certified to EN 10204 3.1.
Samvay Fluid Tekniks manufactures instrumentation tube fittings at its Ahmedabad works and supplies them to Saudi Arabia, where crude oil production and refining and petrochemicals drive most instrumentation demand. Saudi industrial cities like Jubail and Yanbu run some of the largest hydrocarbon plants in the world, with demanding documentation.
Instrumentation tube fittings use a front and back ferrule to grip and seal tubing without welding, giving a leak tight, vibration resistant joint that can be remade many times during maintenance. In Saudi Arabia the typical service is desert heat, sand ingress and sour (H2S) process service, so grade selection and documentation matter as much as price. Every order ships with heat traceable material and a test record.
Instrumentation Tube Fittings for industries in Saudi Arabia
Impulse lines from tapping points to transmitters and analysers.
Impulse lines from tapping points to transmitters and analysers.
Sample tubing for water quality analysers.
Hydraulic and pneumatic control tubing on heavy equipment.
Choosing the right grade in Saudi Arabia
Service conditions in Saudi Arabia usually mean desert heat, sand ingress and sour (H2S) process service. These are the grades we most often supply for that duty.
| Recommended grade | Why it suits Saudi Arabia |
|---|---|
| Duplex 2205 or Inconel 625 to NACE MR0175 | Sour hydrocarbon service, where hardness control and sulphide stress cracking resistance are required |
| Super duplex 2507 or S32760 | High chloride air and seawater, where PREN above 40 resists pitting and crevice corrosion |
| Hastelloy C276 or Monel 400 | Aggressive acids, chlorinated media and effluent where stainless steel would pit |
Instrumentation Tube Fittings specifications
| Types | Tube to Female, Instrument Pipe Fittings, Tube to Union, Accessories, Tube to Male |
|---|---|
| Equivalent To | DK-LOK, PARKER, SWAGELOK, HOKE |
| Standard | ASME SA-479, Type 304-SS, BS 970 304S11, DIN 4401, ASTM A276 Type 304 |
| Sizes | 1/8’’ to 2’’ and 3mm to 50mm |
| Ends | Threaded, Welding, JIC |
| Pressure Rating | 1000 Psi, 3000 Psi, 6000 Psi, 10000 Psi |
| Threads | NPT , BSPT, BSPP |
| Specification | Items Made from Hex, ASTM A276; Items made from Round Bar- ASTM A182 |
| HS CODE | 73072900 |
Instrumentation Tube Fittings we supply in Saudi Arabia
Standards and documents for projects in Saudi Arabia
- Saudi Aramco SAES and SAMSS material requirements
- NACE MR0175
- ASME B31.3
- Positive material identification and hydrostatic test reports on request
- Packing lists, origin certificates and HS code 73072900 or 84818030 on every invoice
Delivery to Saudi Arabia
We deliver by sea from Mundra or Nhava Sheva to Dammam or Jeddah in about 7 to 10 days, or by air. Our regular delivery points include:
- Jubail
- Yanbu
- Ras Tanura
- Dammam
Frequently asked questions
Which material grade do you recommend for projects in Saudi Arabia?
For sour hydrocarbon service, where hardness control and sulphide stress cracking resistance are required, we usually recommend Duplex 2205 or Inconel 625 to NACE MR0175. Where conditions are milder, Super duplex 2507 or S32760 is a cost effective alternative. Share your process data and we will confirm the grade before quoting.
Do you deliver instrumentation tube fittings to Jubail and Yanbu?
Yes. We ship by sea from Mundra or Nhava Sheva to Dammam or Jeddah in about 7 to 10 days, or by air. Regular consignments reach Jubail, Yanbu, Ras Tanura and Dammam, and mixed orders of valves, fittings and accessories can be consolidated into one shipment with a single set of documents.
What certificates come with orders for Saudi Arabia?
Orders for Saudi Arabia are supplied to Saudi Aramco SAES and SAMSS material requirements, NACE MR0175 and ASME B31.3. Every part is heat marked and traceable to its mill certificate, and third party inspection by the agency of your choice can be arranged before dispatch.
Are your tube fittings interchangeable with other double ferrule brands?
Our double ferrule design follows the established geometry used by the leading instrument fitting brands, and the fittings are available from 1/8 inch to 2 inch and 3 mm to 50 mm, rated up to 10000 psi depending on tube wall, with male, female, union, reducer and bulkhead configurations. For mixed brand installations on sites in Saudi Arabia we still recommend using ferrules and nuts from one supplier on each joint.
How do I request a quote for Saudi Arabia?
Email your item list with sizes, grade, quantity and delivery point to sales@samvayglobal.com or message us on WhatsApp at +91 77389 26862. We reply within one working day with price, lead time and shipping terms for Saudi Arabia.